Video Library

The CS video library makes it easy to learn more about the critical process behind testing and installing any of our products. Understanding the proper protocols is crucial to pass inspection, as well as to ensure safety. Select the product category you are interested in below to get started.

View by
View by
Explovent Demo
This video shows how Explovent performs and protects your building during an internal explosion.
Cubicle Curtains On the Right Track Demonstration
We'll show you how our On the Right Track system can remove and replace curtains in under a minute.
APF 200 Floor-to-Floor Installation
The APF model comes fully assembled and takes only a few steps to install.
CS Expansion Joint Cover Installation Instructions for SSR 5” and Above
Our SSR system has been used in some of the most complex seismic design projects around the world, but installing it doesn’t have to be as difficult. This video shows how to install the SSR system for 5” joint openings or larger and is to be used in companion to the printed installation instructions found on our website at www.c-sgroup.com/expansion-joint-covers
4" Floor-to-Wall Reflex® (RFX) Installation
Performing an expansion joint cover transition from floor to wall is not an easy task, but with the help of our video and some practice, you will be able to master the RFX 4" floor-to-wall transition.
Reflex® (RFX) Horizontal Installation
Our Reflex® (RFX) fire barrier is made for 1" - 3" floor joints and can be accompanied by any Construction Specialties expansion joint cover system. Click the video to see how it is installed.
ZB 100-400 Installation Instructions
Zip Block (ZB) is designed to fit any new or existing blockout, and is easily installed by embedding it in high-strength epoxy.
Seal Heat Weld
In this video, we demonstrate the steps required to heat weld some of our seals using a hot plate and soldering iron.
Seismic Corridor System (MACC) Cycle Test
In this video, our Multi-Axial Corridor Cover (MACC) system is tested for seismic movement in all directions.
Seismic Exterior Wall System (XLS) Cycle Test
View a cycle test on one of our seismic exterior wall covers, XLS.
Seismic Moat Cover Systems & Corners Cycle Test
In this video we show the testing of our SSRW model (moat covers), the optional lateral slide model, and the inside and outside corner movements.
Seismic Tread and Riser Cycle Test
All of our covers are cycle tested to ensure they will hold up in a seismic event, including these stair treads and risers that were made custom for Cal Memorial Stadium in Berkeley, California.
ZB Splice
We'll show you how to properly splice a Zip Block® parking cover.
Acrovyn by Design®
Acrovyn by Design® is the voice of interior designers looking for custom finishes that guard against both daily traffic and the unexpected. This is Protection Transformed. Learn more by visiting www.acrovynbydesign.com.
Golisano Children's Hospital Visual Case Study
Find out how Golisano Children's Hospital used our products to build a fun, soothing environment for their patients and guests. For more information, visit http://www.c-sgroup.com/acrovyn.
Heart Hospital of New Mexico at Lovelace Medical Center Visual Case Study
Acrovyn by Design® was chosen to transform an administrative space into a welcoming, branded and sanitary operating room in the Heart Hospital of New Mexico at Lovelace Medical Center. To learn more about Acrovyn by Design, visit www.acrovynbydesign.com.
Installing Acrovyn® Wall Panels Using the Sure Snap™ System
Learn how to install Acrovyn Wall Panels with a reveal using the innovative Sure Snap System. To learn more, visit www.c-sgroup.com/wall-panels.
Lehigh Valley Health Network Visual Case Study
Lehigh Valley Health Network (LVHN) sought reliable wall protection that was both durable and intriguing for patients and visitors within their pediatric departments. Acrovyn by Design® was used to create soothing murals throughout the departments. For more information, visit www.acrovynbydesign.com.
New Acrovyn® Wall Panels
Acrovyn Wall Panels have been reimagined. Thanks to market feedback, the new line provides architects, designers, and facility owners the opportunity to reset their standards with an extensive range of new design options that can be installed in half the time previously required. Wrapped square-edge panels, beveled edge panels, new trims for unfinished edge panels, and graphic printing enhance the ability to create bold interiors. Learn more at http://www.acrovyn.com/wallpanels.
Pasadena School District Visual Case Study
Completed in the fall of 2014, Pasadena Independent School District’s new Dr. Kirk Lewis Career & Technical High School (CTHS) features innovative learning academies, which include technology, transportation, health, food service, construction, business, agricultural and career guidance. To brand the school’s multiple academy locations, spark enthusiasm for learning, generate school pride and provide a sense of wayfinding, IBI Group Inc. brightened the school’s corridors with bright, bold, relevant and innovative graphics using Acrovyn by Design that immediately became a popular backdrop for student selfies and student and school social media.
Riley Hospital for Children Visual Case Study
Learn how Riley Hospital for Children in Indiana worked with local artists to create a soothing, welcoming corridor using Acrovyn by Design®.
United States Department of Energy Visual Case Study
The U.S. Department of Energy wanted an upgraded and relaxing meeting space that included easily maintainable, durable and removable wall panels. The design team created a lounge area that resets the standard for a government workspace with our Acrovyn Wall Panel System. To learn more, visit www.acrovyn.com/wallpanels.
How to Install PediTred® (G4) with Level Base Frame
Learn how to install CS PediTred (G4) entrance grid with a level base frame.
How to Install PediTred® (G4) with Tapered Angle Frame
Learn how to install CS PediTred (G4) entrance grid with a tapered angle frame.
How to Install PediTred® (G4) with Surface Mounted Frame
Learn how to install CS PediTred (G4) entrance grid with a surface mounted frame.
How to Install PediTred® Low Profile (G3) with Tapered Angle Frame
Learn how to install CS PediTred LP (G3) entrance grid with a tapered angle frame.
How to Install PediTred® LP (G3) with Level Base Frame
Learn how to install CS PediTred LP (G3) entrance grid with a level base frame.
How to Install PediTred® LP (G3) with Surface Mounted Frame
Learn how to install CS PediTred LP (G3) entrance grid with a surface mounted frame.
How to Install Pedimat® (M1, M2) with Level Base Frame
Learn how to install CS Pedimat (M1) entrance mat with a level base frame. These instructions are also applicable to Pedimat All-Aluminum (M2).
How to Install Pedimat® (M1, M2) with Tapered Angle Frame
Learn how to install CS Pedimat (M1) entrance mat with a tapered angle frame. These instructions are also applicable to Pedimat All-Aluminum (M2).
How to Install Pedimat® (M1, M2) with Surface Mounted Frame
Learn how to install CS Pedimat (M1) entrance mat with a surface mounted frame. These instructions are also applicable to Pedimat All-Aluminum (M2).
How to Install Floorometry®
Learn how to install CS Floorometry modular flooring.
How to Crimp a Pedimat® Rail
Learn how to crimp a rail on CS' Pedimat entrance mat system.
How to Install Floormations®
Learn how to install CS Floormations.
Helix Care & Maintenance Instructions
We'll show you how to properly care for your new CS Helix entrance mat system.
How to Clean Floormations®
We'll show you how to clean and care for your new CS Floormations entrance flooring system.
How to Grout a Recess for CS Entrance Flooring
Learn how to properly grout a recess and prepare it for a recessed entrance flooring installation.
How to Install GridLine 2 (G6P) with Level Base Frame
Watch our step-by-step video on how to install CS GridLine 2 (G6P) with a level base frame.
How to Install GridLine® (G6) with Level Base Frame
Watch our step-by-step video on how to install CS GridLine (G6) with a level base frame.
How to Install Helix® (Z1, Z2) with Level Base Frame
Watch our step-by-step video instructions on how to install CS Helix entrance mats with a level base frame.
How to Install Helix® (Z1, Z2) with Tapered Angle Frame
Watch our step-by-step video instructions on how to install CS Helix entrance mats with a tapered angle frame.
How to Install Pedigrid® (G1, G8) Deep Pit, No Pan
Watch our step-by-step video instructions on how to install GridLine (G6) and GridLine 2 (G6P) stainless steel entrance grids in a deep pit application.
How to Install Pedigrid® (G1, G8) Deep Pit with Drain Pan
Learn how to install CS Pedigrid (G1/G8) entrance grids in a deep pit application with a drain pan.
How to Install Pedigrid (G1, G8) with Level Base Frame
Learn how to install CS Pedigrid (G1, G8) with a level base frame.
How to Install Pedigrid® (G1, G8) with Level Base Frame and Drain Pan
Learn how to install CS Pedigrid (G1/G8) entrance grids in a level base frame with a drain pan.
How to Perform Field Cuts for CS Entrance Mats and Grids
Learn how to perform field cuts on CS entrance mats and grids.
How to Remove a Pedimat AA (M2) Tread Rail
We'll teach you how to remove and replace a CS Pedimat All Aluminum (M2) tread rail.
How to Remove a Pedimat (M1) Tread Rail
We'll teach you how to remove and replace a CS Pedimat (M1) tread rail.
How to Remove and Add a Pedigrid Rail
Learn how to remove and add rail from CS' Pedigrid (G1) entrance grid system. These directions are also applicable to Pedigrid's serrated aluminum model (G8).
How to Replace a Pedimat (M1) Carpet Tread Insert
Learn how to replace a CS Pedimat (M1) carpet tread insert.
How to Replace Carpet Tread for CS Entrance Mats & Grids
Learn how to replace carpet tread inserts for CS entrance mats and grids. Applicable models include Pedimat AA (M2), PediTred LP (G3), PediTred (G4) and Pedigrid (G1).
How to Restore Crushed Carpet Tread Inserts
We'll show you how to restore crushed fibers on carpet tread inserts.
How to Use a CS Entrance Flooring Template Kit
We've detailed the steps on how to use CS' entrance flooring template kit to measure your recess for a new entrance flooring installation.
How to Install Pedimat® (M1, M2) with Tapered Angle Frame
Learn how to install CS Pedimat (M1) entrance mat with a tapered angle frame. These instructions are also applicable to Pedimat All-Aluminum (M2).
Sustainability Timeline
Watch this video to learn how sustainability is threaded throughout our history at CS, and how it continues to be an integral part of who we are today as we develop products that keep the future in mind.
Louver Torture Test
Watch this video to see how our louvers perform during a torture test.
×