Cubicle Curtains + Track Systems

If the area in which you are placing the curtains contains a sprinkler system, the curtain must not obstruct the sprinkler and thus must have a minimum of 18" of exposed mesh. This is a reference to Refers to section A.13 of NFPA 1 (which is an excerpt from the 2013 edition of NFPA 13: Installation of Sprinkler Systems). The code establishes that "for the proper operation of sprinkler systems, cubicle curtains and sprinkler locations need to be coordinated. Improperly designed systems might obstruct the sprinkler spray from reaching the fire or might shield the heat from the sprinkler. Many options are available to the designer including, but not limited to, hanging the cubicle curtains 18" Below the sprinkler deflector using 1/2" diagonal mesh or a 70 percent open weave top panel that extends 18" below the sprinkler deflector; or designing the system to have to have a horizontal and minimum vertical distance that meets the requirements of NFPA 13".

keywords: mesh, curtains, sprinkler, NFPA, code

Yes, all of our cubicle / hospital curtains are made from flame retardant polyester. They are also washable up to 160° F. The additional components of mesh, snaps, and On The Right Track rings are also flame retardant as well.

keywords: flame, fire, retardant, wash, polyester, mesh, snaps, rings

Yes, LEED information is available upon request for our 6062 traditional track. Simply email CCinfo@c-sgroup.com requesting this information along with your C/S project number and we will email you your project specific LEED documentation within 24 hours.

keywords: LEED, documentation, sustainability, 6062, track

Yes, once you have located the fabric or mesh that you would like to order, simply click on the "order sample" button on that specific page and supply your shipping information.

keywords: mesh, fabric, samples, curtain, order

Fasteners should be screwed/clipped every 2ft.

keywords: track, fastener, clip, screw

Yes - we have nationally located C/S representatives that are readily available to assist you in this process. To contact your local C/S representative please use the following link http://www.c-sgroup.com//find-a-rep

keywords: local, sales, representative

Lead times tend to vary based on fabric availability so please contact us prior to ordering - (800) 416-1102 x1. Cubicle curtains using our quick ship fabrics can ship within 48 hours from the time your order is placed.

keywords: lead, time, curtains, availability, order, ship, quick

It is possible, but not recommended unless using a commercial grade aluminum bending device.

Yes, this can be performed by the simple use of a hacksaw.

Yes, C/S track is offered for both 45 and 90 degree applications, with 12”, 21”, and 24” radiuses.

Our 6062 track comes in white powder coated or aluminum anodized.

Our 1062N carriers will be the ones to give first. These can handle up to 50 LBS each carrier.

We can send any track lengths up to 20 LF.

The standard spacing between each carrier is 6”. This is how you would determine the carriers needed.
Example: If you have 10 LF of track. (10 X 2.3 + 1= 24 carriers)

Yes, we would first need a detail of the track lay out to confirm the radiuses and bends. Once these are confirmed we can respond if a certain track lay out can be manufactured.

Our C/S Spool carriers are universal and would be best to use if the existing track manufacturer is unknown.

Yes, C/S offers both breakaway carriers and hook-and-loop style carriers for use in behavioral health settings.

The hook is designed to pop out of the axle when 8 to 10 lbs of pressure are applied.

Yes, all C/S carriers are supplied in packs of (25) carriers per pack.

There is no difference in durability, however some facilities prefer the appearance of nylon over metal.

C/S I.V. Pendants come with an open loop adapter at the top of the pendant which is applicable on 99% of I.V. carriages.

C/S I.V. Pendants are currently only offered for ceiling mounted applications.