What joint treatments are available for Acrovyn?
CS offers a variety of aluminum trims and color matched Acrovyn trims, as well as a color-matched or clear caulk for sealing joints.
Can I use Acrovyn on radius conditions?
Yes. An Acrovyn .040" (1.02mm) thick wall covering has a minimum radius of 9" (228.6mm) up to 19" (482.6mm) and must be pre-formed prior to shipping product. An Acrovyn .060" (1.52mm) thick wall covering radiuses up to 24" (609.6mm) and must be pre-formed prior to shipping; any radius dimensions beyond the 24" (609.6mm) for .060" (1.52mm) should be formed in the field.
(Note: It is not recommended that our standard or aluminum trims be bent around a radius. This could cause the trims to kink.)
Can Acrovyn be used smooth side out?
No. The back of the Acrovyn has product identifier markings.
Can wainscot trim be used as an edge trim or to “picture frame” Acrovyn wall covering?
Yes. The wainscot trim can be used as an edge trim. CS does not figure this style application when wainscot trim is specified for an order. It is the responsibility of the customer to order the additional wainscot trim to be used for this type of application.
What sheet textures can run parallel to the 43" (1.1m) dimension for sheet?
Beadboard, Dado and Pinstripe textures in both Acrovyn solid colors and Chameleon™ can be used.
[Note: Textured sheet is 43" (1.1m) wide, not 48" (1.2m), due to the limitations of the manufacturing process.]
What tools should be used to cut Acrovyn?
All Acrovyn cuts can be performed using electric shears, a spiral saw or a utility knife. Several cuts will be required to completely cut through if using a utility knife.
Can I use other adhesives for applying Acrovyn?
No. The appropriate adhesive for applying Acrovyn wall covering is Acrovyn Interior Heavy Duty Water Based Mastic. Use of other adhesives will void fire rating and product warranty.
What should I do if I receive my adhesive, primer or caulk frozen?
CS Acrovyn Interiors Heavy Duty Water-Based Mastic Adhesive and Primer are freeze/thaw stable up to three cycles. CS color-matched and clear caulk is freeze/thaw stable for up to three cycles. CS M1 Structural Adhesive has unlimited/freeze/thaw cycles. The Fastbond 30 Contact Adhesive is not freeze/thaw stable and is unusable if frozen. Adhesive, primer and caulk can be thawed at room temperature until completely thawed and consistent.
Do I have to use CS water based primer?
No. As long as it is a water based primer without PVA (polyvinyl acetate), any primer can be used.
Does CS have a chemical resistance summary other than what is listed on your website?
No. We only have data available on the chemicals that are listed in the chemical resistance testing results. We recommend you perform a test for adverse effects in a small, discreet area with any chemical that is not on our care and maintenance document. After using any cleaners on the product, be sure to wipe it down with a wet cloth to remove any residue.
- What joint treatments are available for Acrovyn?
What is Acrovyn 4000?
An engineered PETG that is free of PVC, phthalates, persistent bioaccumulative toxins (PBT) and bisphenol A (BPA). It has a contemporary texture for improved aesthetics and cleanability and is available in variety of Chameleon™ simulated patterns and Acrovyn solid colors. A Cradle to Cradle Certified™ product, it has earned UL® Class A/1 fire rating and meets industry impact strength and fungal resistance tests standards.
What other wall protection material does CS offer?
In addition to Acrovyn 4000 wall protection, CS offers a line of Renaissance™ Real Wood and Metal Products. The Renaissance wood collection has linear profiles and wall panels available in a variety of species and finishes. Wood wall panels have a Class A/1 fire rated particle board core covered in wood veneer. FSC certified wood is available upon request. The Renaissance metal collection has aluminum and stainless steel linear profiles available. Powder coat finishes are also available. Renaissance models are Cradle to Cradle Certified™ Silver or Gold, depending on species and finish selected.
What LEED® credits can Acrovyn 4000 and Renaissance products contribute to?
Building Product Disclosure and Optimization - Material Ingredients -
Option 1 - Material Ingredient Reporting (1 point) / Use at least 20 different permanently installed products from at least five different manufacturers. Acrovyn products certified under Version 3.1 of the Cradle to Cradle Certified™ Product Standard at Silver or Gold meet the credit requirements.
Option 2 - Material Ingredient Optimization (1 point) / Use at least 25%, by cost, of the total value of permanently installed products in the project. Acrovyn products certified under Version 3.1 of the Cradle to Cradle Certified™ Product Standard at Silver are valued at 100% of cost and at Gold are valued at 150% of cost.
Leadership Extraction Practices - Products with recycled content (aluminum, stainless steel, and composite wood), FSC wood and rapidly renewable Bamboo meet this credit requirement.
Indoor Environmental Qualities -
• Specified adhesives comply with SCAQMD Rule 1168 requirement of LEED for Healthcare.
• Products tested to be in compliance with California Department of Public Health (CDPH) Standard Method v1.1-2010 are available.
• Composite woods comply with ULEF and NAF standards.
Contributions vary by product, model and finish. For specific product details, call CS at 800.233.8493.
Can Acrovyn 4000 and Renaissance products be used in Living Building Challenge™ projects?
Material Ingredient Red List - Acrovyn and Renaissance products certified under Version 3.1 of the Cradle to Cradle Certified™ Product Standard with a Material Health Score of Silver or higher are likely to comply with the LBC Red List because they are inventoried to at least 100ppm. The Cradle to Cradle Certified™ Products Program uses an assessment protocol similar to the Red List. For written confirmation and additional ingredient disclosure, call CS 800.233.8493.
Certified Wood - FSC-certified wood can be specified.
Contributions vary by product, model and finish. For specific product details, call CS at 800.233.8493 or visit www.acrovyn.com/C2C.
Why is a Cradle to Cradle Certified™ Certification Important?
The Cradle to Cradle Certified™ Product Standard is a multi-attribute, third-party certification. Products are assessed based on five key attributes:
• Material Health: Each homogeneous material is inventoried, screened, assessed, and optimized down to 100 ppm.
• Material Reutilization: Products are designed for the technical or biological cycle and nutrient management strategies are in place so materials can be perpetually cycled.
• Renewable Energy and Carbon Management: Electricity and direct on-site emissions are off set.
• Water Stewardship: Responsible water consumption and conservation measures are in place at the manufacturing facility and down the supply chain.
• Social Responsibility: Products have material-specific/issue-related audit/certification; supply chain social issues are investigated and improved; and the company has an active innovative social project.
• The standard provides a holistic continuous improvement platform for product development.
• Depending on certification achievement level, the certification can qualify products for LEED® v4 MR Option 1 & 2.
How do I determine the certification level of a specified product?
Refer to the Acrovyn 4000 and Renaissance Real Wood and Metal Cradle to Cradle Certified™ Product Summary, available at www.acrovyn.com/C2C. The document will walk you through the steps necessary to determine the product certification level.
(Note: Due to the number of available model options, it is recommended to confirm the product certification level with CS. For assistance, call CS at 800.233.8493.)
Where do I find Acrovyn and Renaissance Cradle to Cradle Certified™ certificates?
Please click here.
What is the Cradle to Cradle Certified™ level of Acrovyn and Renaissance product?
Cradle to Cradle Certified™ levels achieved are based on the lowest assessment level of model variations and finishes selected. In some cases, there are non-certified model variations that are exceptions to current certifications. Each unique product ordered will need to be evaluated against current certifications to determine its certification level.
Does CS have Health Product Declarations (HPDs)?
CS has an HPD for specific Acrovyn 4000 models. With approval from the Health Product Declaration Collaborative™ and the Cradle to Cradle Products Innovation Institute, CS developed an HPD backed by the Cradle to Cradle Certified™ Product Standard. HPD is a tool that enables manufacturers to disclose product contents and hazards in a consistent format. By including Cradle to Cradle® assessment levels CS was able to communicate the optimization progress of our products for positive environmental and human health impacts. To access CS’ HPD, click here.
Is Acrovyn 4000 GREENGUARD or Scientific Certification Systems, Inc. (SCS) Certified?
No. However, while Acrovyn 4000 is not GREENGUARD or SCS certified, it does meet the requirements of their test standards. VOC Emission Test Certificates for compliance to California Department of Public Health CDPH/EHLB/Standard Method Version 1.1, 2010 (Emission testing method for CA Specification 01350) are available on our website for specific models, click here.
Is Acrovyn 4000 made with bio-based or rapidly renewable resources?
No. However CS continues to review the evolution of bio-based compounds for potential use in future generations of Acrovyn. We believe additional research and discernment is necessary before the use of biopolymers can be accepted as a socially, ethically and environmentally sound practice. Until then, we will continue to use only those raw materials that have been sourced responsibly.
Does Acrovyn 4000 have recycled content?
No. Despite our efforts, due to the chemicals of concerns common in recycled materials, we have not yet found anything in the market we are willing to add to Acrovyn 4000. More than 90% of the PETG and PET presently available as recycled material in the U.S. is contaminated with antimony oxide, trioxide or other modifiers we choose not to have in our product.
Can Acrovyn 4000 be recycled?
Yes. We believe in most situations, recycling building material within our customers' local areas is more cost effective and environmentally friendly. If you need assistance in identifying the version of Acrovyn material or locating a local plastic recycling service, call CS at 800.233.8493.
Does Acrovyn 4000 contain antimicrobials?
No. However, it is resistant to growth of bacteria in accordance with ASTM G22-75, Standard Practice for Determining Resistance of Plastics to Bacteria. Acrovyn 4000 demonstrated no Fungal Growth in accordance to ASTM G21-96, Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi. Taking into consideration that it does not promote growth of some of the most common and most harmful bacteria and fungi found in healthcare facilities, it was decided not to add antimicrobial agents to the Acrovyn 4000 line. CS endorses regular cleaning according to the Acrovyn Wall Protection Systems Care & Maintenance Instructions to combat the spread of germs on hard surfaces.
Why should antimicrobials be avoided?
In 2003, the Centers for Disease Control and Prevention (CDC) concluded that, “No evidence is available to suggest that use of these [antimicrobial] products will make consumers and patients healthier or prevent disease. No data supports the use of these items as part of a sound infection control strategy.” With no evidence indicating that antimicrobials prevent disease, avoiding these chemicals of concern is becoming the industry standard led by guidelines set forth in the Healthier Hospitals Initiative, The Living Building Challenge™, LEED® v4 and others.
CS follows the precautionary principle, avoid product or processes whose environmental and human health effects are disputed or unknown. PVC contains additives - vinyl chloride monomers, halogenated/brominated fire retardants, plasticizers and other materials - that have all been proven to be harmful at some point along their lifecycle. The environmental concerns of PVC have led numerous organizations and authorities in the US and European countries to discourage or ban its use. Dioxin, a PBT toxin that can be emitted during manufacturing and disposal of PVC, is among the top offenders on EPA’s list of toxic chemicals.
Persistent bioaccumulative toxins are chemicals that remain in the environment and pose risk to human health and ecosystems. They are a threat because they do not break down easily in the environment, which is why they are described as persistent, and they can build up in the food chain over time or bioaccumulate. PBTs are known to cause damage to the human nervous and reproductive systems.
The chemical bisphenol A is a known endocrine disruptor that has a multitude of health concerns: obesity, diabetes, problems with fertility and reproductive organs, various cancers and cognitive/behavioral deficits. BPA is residual in polycarbonate plastics; since Acrovyn 4000 is PETG instead of a polycarbonate, there is no BPA residuals in the plastic.
Does CS have ISO 14001 Certification?
Yes. ISO 14001 is the most widely recognized international standard for responsible environmental management. It is CS' environmental management system that audits CS for ongoing compliance with the Environmental and Chemicals Policy.
Why is it important for manufacturers to disclose products' human and environmental impacts?
Architects, designers and owners seek to make informed decisions when they fabricate, specify, install, use and dispose of building products. There are building products that are harmful to humans and the environment; by disclosing environmental and health impacts, it allows our customers to select optimized alternatives.
How is CS transparent about a product’s life-cycle impacts?
Transparency labels and website - Many of CS' products have an on-product label that discloses the product's ingredients and environmental impacts. This label was designed in partnership with Perkins & Will as a way to conveniently put sustainability information right into the hands of customers. Resulting from a collaborative partnership with Perkins & Will, CS created the first on-product label that discloses the product's ingredients and environmental impacts. Click here learn more about CS' Transparency Program.
How has CS optimized its products?
Impact Study - The Cradle to Cradle Products Innovation Institute commissioned Trucost, a leading global environmental data and insight company, to develop an assessment framework with clearly defined indicators to determine the effect optimizing products have on business, the environment and society - CS was one of ten companies selected for the study. To learn more about the positive impacts and the optimization of Acrovyn 4000, click here to read the CS Impact Study.
- What is Acrovyn 4000?
Is Acrovyn fire rated?
Yes. Acrovyn is UL® Classified and Labeled or Intertek Labeled. The following list states the six distinctly different applications for Acrovyn: (more information can be found here)
1. Acrovyn Profiles (handrails, crash rails, bumper guards, accent rails and corner guards) - UL Classified and Labeled Class A/1
2. Acrovyn Fire Rated, Flush Mounted, Corner Guards are UL Labeled with one-hour and two-hour installation
3. Acrovyn Wall Covering - UL Classified and Labeled Class A/1
4. Acrovyn Wall Panels and Saratoga® Wall System - UL Classified and Labeled Class B/2
5. Acrovyn Door Protection is Intertek Labeled for 20-minute wood fire doors (particle board core with wood stiles and rails, surface mounted or concealed intumescent required) and 60-minute wood mineral core fire doors with non-combustible stiles and rails (surface mounted or concealed intumescent required).
6. Acrovyn Door Frame Protection is Intertek Labeled for 60-minute standard steel UL Subject 63 fire door frames (intumescent edge seal required).
What is the difference between Class A/1 fire rating and time-hour fire rating?
Class A/1 designates the material's surface burning characteristics when tested in accordance with UL723, ASTM E84 and CAN/ULCS102.2. The governing building codes such as IBC, NFPA, UBC, BOCA and SBCCI mandate that all building materials meet the minimum of a Class C/3 rating. Time-hour rating is the appropriate designation for those products applied onto or into equally rated doors, as well as fire rated flush mounted corner guards installed in fire rated walls. Applying a material that is not time-rated to a fire rated door and/or door frame will negate the rating of the assembly.
What is the value of the UL label?
The Underwriters Laboratories label signifies that each piece of Acrovyn constantly meets or exceeds the requirements of the specified test procedure and outcome. CS products that are classified and labeled are part of the UL Follow-Up Program, which ensures we continue to use classified materials and components.
How are the UL or Intertek certified products identified?
They are identified with official labeling and/or stamping on the products' packaging and/or on the ordered product. For a complete list of CS products that are certified by UL, visit www.acrovyn.com/ul, or by Intertek, visit www.acrovyn.com/int, search both by company for "Construction Specialties."
- Is Acrovyn fire rated?